Solar Pilling Lights -LED garden decorative lights outdoor waterproof deck lighting
Size: | |
---|---|
Material: | |
Quantity: | |
Material : ABS
3 COLOR CHOICES (LED :3pcs nature white 5500-6200K + 3pcs blue +3pcs green), Switch from White to Green to Blue by pushing the button switch.
In the day time it absorbs the Sun Power, and in the evening or in the dark place it'll give a light up to 6 hours.
For outdoor use.
Ideal for decorating your garden / house...
(REMARKS: it's also good for home decoration even without light.....)
Material | ABS |
Size | 12X8.1X5.2CM |
Solar Panel | 2V/80MA |
Battery | 1 x AAA 1.2V/600MAH rechargeable Battery |
Led | 3 COLOR CHOICES (LED :3pcs nature white 5500-6200K + 3pcs blue +3pcs green) |
During the day, the solar panel converts sunlight into electricity and recharges the battery . At night, the light turns on automatically using the electricity stored during that day. The number of hours the light stays on depends on your geographical location, weather conditions and seasonal sunlight availability. Place the solar light fixture in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations will not allow the battery to charge fully and will reduce the hours of nighttime lighting. The selected location should not be near nighttime light sources, such as porch lights, street lights or pool lights , as these may cause the solar light to turn off prematurely.
1. Take out the solar light from package carefully. Press the ON/OFF switch on the base part of solar light.
2. Use the two included mounting screws to mount the Pliling Light to the flat wall.
3. Allow the light to charge for a full day
Note : 3 COLOR CHOICES (LED :3pcs nature white 5500-6200K + 3pcs blue +3pcs green), Switch from White to Green to Blue by pushing the button switch.
• The battery should be replaced when a shorter than normal operating time is detected despite the solar panel receiving a full 8 hour charge in direct sunlight.
• Unscrew all 6 screws on the battery compartment with an adequate screwdriver and remove the cover.
• Take out the plastic seal.
• Remove the battery from the bracket and replace it by a new freshly charged battery of identical size.
• Now reinsert the seal into the battery compartment and press the lid back on. Now screw the 6 screws back in again with an adequate screwdriver.
Powered by solar, no pollution!!!
Suitable for garden and pathway decoration.
content is empty!