Your are here: Home » Products » Solar Patio Lights » Solar Path Indicator (3pcs Per Pack)- LED Decorative Garden Light Outdoor

Solar Path Indicator (3pcs Per Pack)- LED Decorative Garden Light Outdoor

Solar Path Indicator (3pcs Per Pack)- LED Decorative Garden Light Outdoor

Size:
Material:
Quantity:
  • HK-SL601-SP
  • Hanko
Product Description

Solar Path Indicator Light

Each path light is with 1 x warm white LED + 1 x RGB color changing LED inside (2 function in 1)

In the day time it absorbs Sun Power, and in the evening or in the dark place it'll give a light up to 6 hours light.

For outdoor use.
Ideal for home decoration even without light; Good for decorating your garden / table (without earth spike) / house

Specifications
Material: 
 Plastic 
Size:
11x11x11cm (net height is 4.5cm, total height is 11cm)
Solar panel:
2V /70MA
Battery:
AAA / 1.2V 500MAh, Ni-Mh rechargeable battery
LED:
1pc Ultra-Bright Warm White LED (Steady On)  + 1pc RGB color changing LED

How your Solar Powered Fixture Works

During the day, the solar panel converts sunlight into electricity and recharges the battery . At night, the light turns on
automatically using the electricity stored during that day.The number of hours the light stays on depends on your
geographical location,weather conditions and seasonal sunlight availability. Place the solar light fixture in an area where it can receive direct sunlight for at least 8 hours each day.Shadowed locations will not allow the battery to charge fully and will reduce the hours of nighttime lighting. The selected location should not be near nighttime light sources, such as porch lights, street lights or pool lights, as these may cause the solar light to turn off prematurely.

Assembly:

�� Remove the parts carefully from the packaging.

�� Make sure the switch is ON (Turn the spike anticlockwise to take it off ,then you will see the switch).

�� The switch is off/ on1(warm white) / on2( RGB)

�� Position the solar lights where it could receives full sun through the day.


Installation:

�� Maximum sunlight will give the internal battery the best charge and so give best results.
�� Position solar lights where they are free from cover or shade and, ideally.
�� Avoid other light sources which may cause solar lights to flicker on and off. Also allow a space of approx.1.5m between solar lights.
�� Solar lights will not be very bright or long lasting until a full day's sunlight has been received.
�� Alternatively, batteries can be charged to full capacity in a battery charger before use.

Maintenance:

�� If solar panel gets dirty, the charging capacity will be reduced. Clean the surface occasionally with a damp cloth
�� Batteries can be given a temporary boost in a battery charger if there has been limited sun or extra light is needed for a special occasion.
�� Batteries may need replacing after 1-2 years, depending on the conditions they have had to endure. The battery is inside of the plastic battery cover. When you need to replace the battery, remove the battery cover by unscrewing the 6 screws. Remove the old battery and replace it with a new AAA size 1.2V rechargeable battery of same or greater mAh (DO NOT USE ALKALINE BATTERIES)
�� Low winter light levels or harsh weather in your locality may lead you to decide to store your solar lights indoors until conditions improve. If so, clean and dry the lights, turn off or remove the batteries: store in a dry spot and reassemble in spring as described in 'installation'.

Features




Features1

 Powered by solar, recyclabe, no pollution!!




Features2

With two functions in one product (warm white + RGB color changing)




Features3

With earth spike 




Features4

Suitable for garden, table (remove earth spike) use, totally waterproof for outdoor use.


Contact Us

Related Products

Related News

content is empty!

QUICK LINK

CONTACT US

  vicky@hankoelectronics.com
   86-013515268339
  czhanko
   86-13515268339
Log In | Support by Youxin
© Changzhou HANKO Electronics Co., Ltd.